   |
||||
|
|
Replacement Sweeps and Blades We also stock blades for other popular brands! See Plow Tools for Mulchers and Sub-Soil Shanks |
|||
|
Hoeme Sweeps
HC26F2 26" 1/2x3" Bolts 16 lbs. HC16AA-2HF 1/2x2-1/4" Bolts 7 lbs. HC18AA-2HF 1/2x2-1/4" Bolts 8 lbs.
|
Duckfoot Sweeps
CS-6 1/2x2x2-1/4" Bolts 3.5 lbs.
|
|||
|
Hoeme Chisels Chromed Cap Chisel HS13CP 6 lbs.
|
Hoeme Chisels Double Ended Chisel 250-22 Plain 5 lbs.
|
Hoeme
Shank Wear Shield
H-26 Wear Shield 1/3 lbs.
|
||
|
Stubble Mulcher
Blades
SMS-1 36" 17 lbs. SMS-2 42" 20 lbs. * We also stock blades for S&S and Hamby
|
Stubble Mulcher
Blades Pictured: Razor Sweep 48" 40 lbs.
|
Tipper * Use an N-345 Tipper with an N-345 Lister Bottom or an N-346 Tipper with an N-346 Lister Bottom * Helps Support the Lister Bottom N-345 Tipper 3 lbs. N-346 Tipper 3 lbs.
|
||
|
Replacement Points
For 1" Thick Badger Shanks
M-30 Plain (1-1/2" Wide) 3 lbs. M-30 Hardfaced (1-1/2" Wide) 3 lbs. M-30 CC Narrow (1-7/8" Wide with Chromium Carbide Cap) 4 lbs. M-30 CC (2-1/4" Wide with Chromium Carbide Cap) 4.5 lbs. M-30 CCWA (2-1/4" Wide with Wrap Around Nose Chromium Carbide Cap) 5 lbs.
|
Badger Weld On Repair Tips RT-1 Badger 3 lbs. RT-2 BigOx 6.5 lbs. RT3 SubSoil 5 lbs. RT-4 Hook Badger 4 lbs. RT-5 Sk-3Rp 4 lbs.
|
|||
| Replacement Shins | ||||
|
For Standard or
XL Badgers
Replace-SHIN-ST 1"x20" (Hardfaced) 3 lbs. Replace-SHIN-XL 1"x26" (Hardfaced) 4 lbs.
|
For Razor & SubSoil Shank Replace-Shin-Sub (Chromium Carbide) 1-1/2" x 14-3/4" 3.5 lbs.
|
|||
|
For Razor & SubSoil Shank Replace-Shin-Razor (Chromium Carbide) 1-1/2" x 7" 2 lbs.
|
||||
|
Chromium Carbide
For All Curved Ripper Shanks This will fit the Standard Badger, XL Badger, and Hook Badger 1-3/8"x14" (will cover up to 19") 2 lbs. 1-5/8"x14" (will cover up to 19") 2.5 lbs.
|
||||
|
Knife Attachments For Badger Attaches to Subsoil Shanks, Badger Claws, & Hook Badgers Please Specify Roll-A-Cone or Hamby
BS-28 8 lbs. per pair
|
S-Shank Replacement
Point
SSRP-1 2 lbs.
|
|||
|
Guide Wheel
Replacement Blade
* Available in 4, 5 or 6 Hole * 1/4" material on 5 and 6 Hole * 20-1/4" diameter
GW-20 Cone Only 4-Hole Blades have 5" Bolt Circle & 3.62" Pilot 19 lbs. 5-Hole Blades have 5.5" Bolt Circle & 4" Pilot 27 lbs. 6-Hole Blades have 6" bolt circle & 4.62" Pilot 27 lbs.
|
S-Shank Sweep
STS-4 4" Sweep 2 lbs.
CC9A7HF 9" Sweep 2.5 lbs.
|
|||
|
Fluted Coulter
Blades
Each blade available in 4 or 5 hole
4 Hole Blades have 5" Bolt Circle & 3.62" Pilot 5 Hole Blades have 5.5" Bolt Circle & 4" Pilot
17" Blade 9 lbs. 20" Blade 15 lbs.
|
Plain Blades
22" Blade 4 or 5 Hole 20 lbs. 24" Blade 5 or 6 Hole 23 lbs. 26" Blade 5 or 6 Hole 37 lbs. 28" Blade 6 Hole 39 lbs.
4-Hole Blades have 5" Bolt Circle & 3.62" Pilot 5-Hole Blades have 5.5" Bolt Circle & 4" Pilot 6-Hole Blades have 6" Bolt Circle & 4.62" Pilot
|
|||
|
Lister
Bottoms
Use N-346 with Tipper on Bedder Buster N-345 11" 7 lbs. N-345 15" 13 lbs. N-346 15" 13 lbs.
|
Chisel Point
Attachment for Stubble Mulcher Bolts to Stubble Mulcher Frog SMR-1 20 lbs.
|
|||
|
Replacement Points For 1" Thick Shank M-8001 (Poured Chromium Carbide 2-1/4" wide) 3.5 lbs. M-8001DF (Poured Chromium Carbide with Dorsal Fin 2" wide) 5 lbs.
For Big Ox M-30 Big Ox (2-1/4" Wide with Chromium Carbide Cap) 4.5 lbs.
For Hook Badger Fits 1-1/4" Thick Shank -- Will fit some John Deere Shanks M-60 (2-1/2" Wide with Chromium Carbide Cap) 9 lbs.
|
||||
