Shanks

Straight Shanks

SK-1                5/8x2x27"                                               10 lbs.

SK-2               3/4x2-1/2x30"                                         16 lbs.

SK-3 30"         1x3x30"  drilled 1/2" & 5/8"                    25 lbs.

SK-3 36"         1x3x36"  drilled 1/2" & 5/8"                    30 lbs.

SK-4                1-1/4x3x34" drilled 1/2" & 5/8"              36 lbs.

 

 

Foot Piece Adaptor

FPA-23                                          1/4 lbs.

Allows use of 1/2" Sweep bolt

Takes place of Washer

 

Foot Pieces

FP-1 1/4" Thick, Fits SK-1  Wt 4.5 lbs.
FP-2   5/16" Thick, Fits SK-2 Wt 5.5 lbs.
FP-3 3/8" Thick, Fits SK-3 Wt 6 lbs.
FP-3HD 1/2" Thick, Fits SK-3 Wt 8 lbs.
FP-3A 3/8" Thick, Fits SK-3 set screw adjustor Wt 7 lbs.
FP-3AHD 1/2" Thick, Fits SK-3 set screw adjustor Wt 9 lbs.
FP-3HDT 1/2" Thick, Fits SK-3 slotted out to trip  Wt 8 lbs.
FP-4 1/2" Thick, Fits SK-4 Wt 8 lbs.
FP-4A 1/2" Thick, Fits SK-4 set screw adjustor Wt 9 lbs.
FP-4T 1/2" Thick, Fits SK-4    

Slotted out to Trip (Available 1/2" or 5/8" Bolts)

 

 Wt 8 lbs.

                                              

All Footpieces use 1/2" Bolts except for FP-3HDT and FP-4T

Are Available with 1/2" or 5/8" Bolts

                                                                                     

Pictured:  FP-3                                                     Pictured:  FP-3AHD                                                  Pictured:  FP-3HDT

 

3-1/2" Side Offset Shank

Drilled 1/2" Holes

SK-1 Offset   5/8x2x30"          Wt 10 lbs.

SK-2 Offset  3/4x2-1/2x30"    Wt 17 lbs.

SK-3 Offset   1x3x30"              Wt 30 lbs.

SK-4 Offset   1-1/4 x 3 x 34"   Wt 38 lbs.

 

5" and 7" Side Offset Shank

Drilled 1/2" Holes

SK-3  5" Offset  1x3x36"   Wt 35 lbs.

SK-3  7" Offset  1x3x36"   Wt 35 lbs.

 

5" Rear Offset Shank

(or Forward Offset)

Drilled 1/2" Holes

SK-1 Rear Offset      5/8 x 2 x 27"           Wt 10 lbs.

SK-2 Rear Offset     3/4 x 2-1/2 x 30"     Wt 16 lbs.

SK-3 Rear Offset     1 x 3 x 30"                Wt 30 lbs.

SK-4 Rear Offset     1-1/4 x 3 x 34"         Wt 38 lbs.

 

Hoeme Shank

G-9      1 x 2 x 22" Clearance           21 lbs.

H-26   1-1/4 x 2 x 26" Clearance    26 lbs.

3110     1-1/4 x 2 x 30" Clearance    30 lbs.

55401    1-1/2 x 2 x 30" Clearance   36 lbs.

All Shanks have 15/16" Hole in tip to fit SHSH

Pictured:  H-26

 

S-Shank

* Field Cultivator Shanks also fits Crustbuster, Noble, & Others

* 7/16x1-3/4" Material

S-450 Shank has 18" Clearance     8 lbs.

 

Replacement tips found here.

Spring Tine Shank

2 Piece Shank with 24" Clearance

Shank is made of 1-3/4x5/8 Material and

Spring is made of 1/2x3 Material

RC 1200 Shank     Wt 8 lbs.

RC 14751 Spring   Wt 14 lbs.

Also fits other brands

Pictured:  2 piece shank & Spring tine

Pictured:  Shank only

 

 

Click here to view Plow Tools